• Proguard Gastronomy 200 Osmosis System
  • Proguard Gastronomy 200 Osmosis System
question_answer

Any questions?
We will be happy to advise you.

Be contacted about this product

Proguard Gastronomy 200 Osmosis System

REF : 1053696

Complete kit Proguard Gastronomy 200 reverse osmosis system by Brita. Supplied with a reverse osmosis unit and pre-filter. High-performance washing for glassware without wiping and with great brilliance. The kit includes a pre-filter 21*17*41cm + the reverse osmosis unit 14.5*41*43 cm. The set is ready to connect to the glass washer. Note, for optimal washing, it is necessary to use a detergent and rinse aid adapted to osmosis water.

€2,150.00
Tax excluded
Shipped directly from the manufacturer's warehouse
2580 € incl. tax

local_shipping

Free shipping under certain conditions.

info_outline
credit_card

from 82.42 €/month including tax

info_outline
verified_user

Warranty: 2 years old

info_outline
headset_mic

After-sales service throughout France

info_outline
settings

Preventive maintenance possible

info_outline

Any questions?
We will be happy to advise you.

Be contacted about this product

Thanks to its advanced reverse osmosis technology, the PROGUARD Gastronomy 200 provides high-quality filtered water for your glass washers with fully demineralized water. Efficient and equipped with a powerful flow, this filtration system meets the demands of professional bars by treating all incoming water. The PROGUARD Gastronomy 200 is the ultimate professional solution for removing water impurities, protecting your equipment, and improving wash quality. It protects your devices against limescale, corrosion, and gypsum, even in the event of water consumption fluctuations.

Advantages:

Significant reduction in downtime: Two reverse osmosis membranes offering a mineral retention rate above 97%, thus protecting your equipment from corrosion, limescale, and gypsum deposits.

Adaptability to all water consumption levels: From the lowest to the highest. Mineralization adjustment: Through a bypass, according to your equipment's individual specifications.

High performance: Flow rate up to 200 L/h (at an inlet water temperature of 25°C) and 140 L/h (at 15°C).

Intuitive user interface: Equipped with an easy-to-use display showing all important parameters.

Horizontal or vertical: It can be used in all positions to fit into small spaces.

When to change the filter?

Every 6 months. No need to monitor volumes, the Proguard osmosis system requires a filter change every month.

Cartridge change

Simple manual filter change. Consult the user manual before use.

Technical advice

  • This filter is compatible with water from 4° to 60°
  • The working pressure must be between 2 and 6 bar
  • The filter can be installed vertically or horizontally
  • A single-phase 220 power supply is necessary.
1. Pre-filtration Carbon block filtration retains large particles up to 5 µm and protects the two high-quality reverse osmosis membranes.
2. Reverse osmosis membrane Two top-quality reverse osmosis membranes remove ions and molecules. With a mineral retention rate ≥ 97%, this step reliably protects against corrosion, limescale, gypsum, and other contaminants.
3. Bypass Bypass adjustment allows for tailored and configurable mineralization levels by mixing network water. This is particularly important for steam ovens that require a specific level of mineralization.
4. Display The integrated display shows all important parameters such as pressure, flow rate, and filtrate conductivity.
5. Pump A reverse osmosis system with a rotary pump ensures high performance, easy handling, and essential reliability.

Features

kW
1.70
Tension (v)
220-240
Warranty
2 years old
Delivery
free France
See all features

You might also like